Motorola Transmitter ID Tag

www.geocities.com/mikeht220/txidtag.html

Note: This image was scanned at 600 dpi at original size. It should be 2 5/8 by 1.5 inches. If it is larger, re-adjust accordingly to retain the resolution.

Show Motorola Transmitter ID Tag

Directions

The tag complies with F.C.C. requirements for identification tags on all radio transmitters. If transmitter is not in view of operating position or is not readily accessible for inspection, affix tag to control equipment.

1. Fill in the blanks with a typewriter or indelible ink [this is 1970 and you are not allowed to use a laser or inkjet printer because they won't exist for another 20 years].

2. Clean off the area on the transmitter housing to which the tag is to be affixed.

3. Apply the tag [use a glue, original had adhesive backing].

4. Use a clear varnish or shellac for greater protection.

Part #54B82256B31

Go to the HT-220 Page